Courtesy of: www.drive-safely.net
Back when I was a long-haul truck driver, I used to love driving through the mountains. I frequently drove through the Appalachian Mountains as well as the Rocky Mountains. However, driving through the mountains can be a very dangerous experience as well, even on major expressways. Donner Pass, for example, is still one of the deadliest stretches of roadway in the United States, even though the well maintained Interstate 80 is how most people navigate through that area. Even Interstate 81 along the eastern Untied States can get dangerous through the mountainous areas. Once you get off the expressway or include inclement weather, the mountains can turn from beautiful to deadly in a real big hurry. In this article, I will be going over the top 7 things you need to know before driving through the mountains.
#7 – Have A Full Tank Of Gas
In some mountainous areas, you may go 100 miles or more without passing a single gas pump. If you do see a small gas station somewhere deep in the mountains, expect to pay much more per gallon than you will anywhere else. It is not unusual for remote and mountainous gas stations to charge an extra $2 to $4 per gallon on top of the already outrageous gas prices. Running low on gas or running out of gas in the mountains can be extremely costly.
Since weather can change so quickly in the mountains, it is also essential to have a full tank of gas in case you get stranded. Sudden blizzards, ice storms, extremely dense fog, multi-vehicle crashes, and many other situations can leave you stranded for 24hrs or longer. In the winter months, a full tank of gas can provide you with many hours of heat and electricity.
#6 – Brake Early Before Turns
While you may not pay much attention to the “suggested speed” signs before turns in flat areas, you should pay much more attention to those signs in the mountains. Very sharp turns are extremely common in mountainous areas. If you’re going downhill, there is just that much more momentum to stop.
By braking early, you can actually coast or accelerate through the turns. This is very helpful for your vehicles stability. If you attempt to brake too hard after you have already entered the turn, all that momentum shifts forward, making it even more difficult to gain control of your vehicle. However, if you accelerate through the turn, that momentum shifts towards the rear of your vehicle, giving you much more control. This is the same method that race car drivers use. Brake before the turn and accelerate through. Remember, you can enter a turn too slow as many times as you want, but in the mountains, you can usually only take a turn too fast once before it’s game over.
#5 – Brake And Downshift BEFORE The Downgrade
Many drivers do not plan ahead by braking before downgrades and instead, people don’t start braking until after they are half way down the hill and their speed has picked up. This is an incorrect braking method. All drivers, even those with lightweight vehicles, should brake before a downgrade. This not only helps on maintenance costs, but is also a much safer method of speed control. Anticipate the downgrades to speed you up. If you are driving a manual transmission vehicle or are able to shift into a lower gear, do this before the downgrade as well. Attempting to shift while on a downgrade can cause major problems. If you happen to stall the engine or get stuck in neutral, you will need to rely fully on your vehicles brakes to slow you down.
#4 – Use The “Pulse” Braking Method
Even if you properly brake before a downgrade and shift to a lower gear, you will still likely need to apply the brakes while on the downgrade. They key here is to never stay on the brakes for an extended period. Instead, you should use the pulse braking method – the same method used by truckers carrying 80,000lbs down steep mountain grades. To properly use this method, find a “safe speed” as you go down the hill. Say, for example, your “safe speed” is 40mph. You should allow your vehicle to speed up to 45mph and then apply steady break pressure until your speed drops to 35mph. At that point, let off the brakes and allow your vehicle to speed back up to 45mph, then repeat the process. By pulsing your brakes in this way, you give your brake pads time to cool off. As you apply the brakes, your brake pads will heat up. The hotter your brake pads get, the less effective they are, until they become completely ineffective at all. Using the pulse braking method can help to keep your brakes cool and functional.
#3 – Beware Of Quickly Changing Weather Conditions
As you’re probably aware, temperatures change with altitude. Some mountain passes can bring you up and down thousands of feet within a short distance. When I was a truck driver, I used to experience this all the time. I’d start climbing a mountain with sunny clear blue skies, and by the time I reached the top of the pass, it would be a near blizzard. When navigating the Smoky Mountains, fog was a huge issue, especially in the valleys. Visibility could go from being totally clear to being extremely limited literally in seconds. From temperature changes to precipitation changes to fog – it can all change on you in an instant.
#2 – Bring Food, Water, And Emergency Gear
There are a number of reasons why you might find yourself stranded while driving on a mountain road. From hitting an animal to getting stuck in a blizzard to a car accident or a breakdown, you do not have access to some of the comforts on normal roadways. Cell signal can be non-existent and in remote areas, you might not see another vehicle for hours (or days if the weather is bad). Even if you are able to get a cell phone call out, it could be many hours (or days) before anyone can reach you. It’s important to bring at least a couple days worth of food, water, and a fresh pair of clothes. Should your clothes get wet for whatever reason, dry clothing could literally save your life. Also be sure to have any tools you might need for minor vehicle repairs such as changing a flat tire or replacing a belt. Roadside assistance might not be able to meet you wherever you are.
#1 – Get A CB Radio
A small handheld CB radio wont cut it. You need to get a mobile CB radio with an external antennae on your vehicle. This might not be practical for a weekend trip, but if you’re someone who frequently drives on remote mountainous roadways, a CB radio can literally be a life-saver. In most remote and mountainous areas, there is no cell phone signal. However, a CB radio will still work – you just need to have another person with a CB in the area. Almost every truck driver in America has a CB radio and they frequently monitor channel 19. If you’re ever in trouble, switch to channel 19 and start asking for help. Eventually, a trucker is bound to be nearby to offer assistance.
Article found at: https://www.drive-safely.net/7-tips-for-mountain-driving/